Total:0Subtotal: USD $ 0.00
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT

QF-HX103C IPTV 1GE + 3FE CATV XPON ONT

Identificación automática para redes GPON y EPON, puertos WAN 1GE + 3FE, CATV de fibra única, puerto SC-APC para evaluación de fibra.


Color:

    Detalle del producto

    1. Información general

    1G3F+CATV ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions by Qualfiber, and The carrier-class FTTH application provides data service access.
    1G3F+CATV ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically between EPON and GPON when it accesses the EPON OLT or GPON OLT.
    1G3F+CATV ONU adopts high reliability, easy management, configuration flexibility, and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X.
    1G3F+CATV ONU is designed by Realtek chipset 9603C.

    2.Functional Feature

    Support GPON and EPON Mode, and switch mode automatically
    Support ONU auto-discovery/Link detection/remote upgrade of software
    WAN connections support Route and Bridge mode
    Route mode supports PPPoE/DHCP/ static IP
    Support QoS and DBA
    Support port Isolation and port VLAN configuration
    Support Firewall function and IGMP snooping multicast feature
    Support LAN IP and DHCP Server configuration;
    Support CATV interface for IPTV, remotely controlled by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
    Support Port Forwarding and Loop-Detect
    Support TR069 remote configuration and maintenance
    Specialized design for system breakdown prevention to maintain stable system

    3.Hardware Specification

    Ítem ​​técnico Detalles
    Interfaz PON 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
    Sensibilidad de recepción: ≤-28dBm
    Transmisión de potencia óptica: 0 ~ + 4dBm
    Distancia de transmisión: 20 km
    Longitud de onda TX: 1310 nm, RX: 1490 nm
    Interfaz óptica Conector SC / UPC o personalizado
    Interfaz LAN 1 x 10/100 / 1000Mbps y 3 x 10 / 100Mbps interfaces Ethernet autoadaptativas. Completo / medio, conector RJ45
    Interfaz CATV RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz,  RF output impedance: 75ΩRF output level: 78dBuVAGC range: 0~-15dBmMER: ≥32dB@-15dBm
    LED Estado de POWER, LOS, PON, SYS, LAN1 ~ LAN4, Internet, Worn, Normal (CATV)
    Presionar el botón 1, para la función de reinicio
    Condición de uso Temperature: 0℃~+50℃
    Humidity: 10%~90%(non-condensing)
    Storing Condition Temperatura: -30 ℃ ~ + 60 ℃
    Humidity: 10%~90%(non-condensing)
    Fuente de alimentación DC 12V / 1A
    El consumo de energía ≤6W
    Dimensión 155mm×92mm×34mm(L×W×H)
    Peso neto 0.24Kg

    4.Panel luces Introducción

    Lámpara indicadora

    Estado

    Descripción

    PWR

    En

    El dispositivo está encendido.

    Apagado

    El dispositivo está apagado.

    PON

    En

    El dispositivo se ha registrado en el sistema PON.

    Parpadeo

    El dispositivo está registrando el sistema PON.

    Apagado

    El registro del dispositivo es incorrecto.

    LOS

    Parpadeo

    Las dosis del dispositivo no reciben señales ópticas.

    Apagado

    El dispositivo ha recibido señal óptica.

    SYS

    En

    El sistema del dispositivo funciona normalmente.

    Apagado

    El sistema del dispositivo funciona de manera anormal.

    INTERNET

    Parpadeo

    La conexión de red del dispositivo es normal.

    Apagado

    La conexión de red del dispositivo es anormal.

    LAN1 ~ LAN4

    En

    Port (LANx) is connected properly (LINK).

    Parpadeo

    El puerto (LANx) está enviando o recibiendo datos (ACT).

    Apagado

    Excepción de conexión de puerto (LANx) o no conectada.

    Desgastado

    (CATV)

    En

    Input optical power is higher than 3dbm or lower than -13dbm

    Apagado

    La potencia óptica de entrada está entre -13dbm y 3dbm

    Normal

    (CATV)

    En

    La potencia óptica de entrada está entre -13dbm y 3dbm

    Apagado

    Input optical power is higher than 3dbm or lower than -13dbm

    5.Application

    Solución típica: FTTO (Oficina) 、 FTTB (Edificio) 、 FTTH (Inicio)
    Typical Application(optional):INTERNET、IPTV、VOD、VoIP、IP Camera etc.

    Figura: Todas las funciones Diagrama de aplicación opcional

    6.Ordering information

    nombre del producto

    Modelo del Producto

    Descripciones

    XPON ONU 1G3F +CATV

    QF-HX103C

    1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter

    Contáctenos:

    Qualfiber Technology Co., Ltd                                               
    Envíenos un correo electrónico: sales@qualfiber.com
    Sitio web:https://www.qualfiber.com Las
    especificaciones están sujetas a cambios sin previo aviso.
    Copyright © QUALFIBER TECHNOLOGY. Todos los derechos reservados.


  • Anterior:
  • Siguiente:

  • Write your message here and send it to us