Automatic identification for both GPON and EPON network, 1GE+3FE WAN ports, single fiber CATV, SC-APC port for fiber assessment.
Color:
1. Overview
1G3F+CATV ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions by Qualfiber, and The carrier-class FTTH application provides data service access.
1G3F+CATV ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically between EPON and GPON when it accesses the EPON OLT or GPON OLT.
1G3F+CATV ONU adopts high reliability, easy management, configuration flexibility, and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X.
1G3F+CATV ONU is designed by Realtek chipset 9603C.
2.Functional Feature
Support GPON and EPON Mode, and switch mode automatically
Support ONU auto-discovery/Link detection/remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IP
Support QoS and DBA
Support port Isolation and port VLAN configuration
Support Firewall function and IGMP snooping multicast feature
Support LAN IP and DHCP Server configuration;
Support CATV interface for IPTV, remotely controlled by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
Support Port Forwarding and Loop-Detect
Support TR069 remote configuration and maintenance
Specialized design for system breakdown prevention to maintain stable system
3.Hardware Specification
| Technical item | Details |
| PON Interface | 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++) |
| Receiving sensitivity: ≤-28dBm | |
| Transmitting optical power: 0~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/UPC Connector or customized |
| LAN Interface | 1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| CATV Interface | RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz, RF output impedance: 75ΩRF output level: 78dBuVAGC range: 0~-15dBmMER: ≥32dB@-15dBm |
| LED | Status of POWER, LOS, PON, SYS, LAN1~LAN4 , Internet, Worn, Normal(CATV) |
| Push-Button | 1,For Function of Reset |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%～90%（non-condensing） | |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%（non-condensing） | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm（L×W×H） |
| Net Weight | 0.24Kg |
4.Panel lights Introduction
|
Pilot Lamp |
Status |
Description |
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. | |
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. | |
|
Off |
The device registration is incorrect. | |
|
LOS |
Blink |
The device doses not receive optical signals. |
|
Off |
The device has received optical signal. | |
|
SYS |
On |
The device system runs normally. |
|
Off |
The device system runs abnormally. | |
|
INTERNET |
Blink |
The device network connection is normal. |
|
Off |
The device network connection is abnormal. | |
|
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). | |
|
Off |
Port (LANx) connection exception or not connected. | |
|
Worn (CATV) |
On |
Input optical power is higher than 3dbm or lower than -13dbm |
|
Off |
Input optical power is between -13dbm and 3dbm | |
|
Normal (CATV) |
On |
Input optical power is between -13dbm and 3dbm |
|
Off |
Input optical power is higher than 3dbm or lower than -13dbm |
5.Application
Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
Typical Application(optional)：INTERNET、IPTV、VOD、VoIP、IP Camera etc.
Figure: All function Optional Application Diagram
6.Ordering information
|
Product Name |
Product Model |
Descriptions |
|
XPON ONU 1G3F +CATV |
QF-HX103C |
1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter |
Contact us:
Qualfiber Technology Co., Ltd
Email to us: sales@qualfiber.com
Website: https://www.qualfiber.com
Specifications are subject to change without notice.
Copyright © QUALFIBER TECHNOLOGY. All rights reserved.
Write your message here and send it to us
