Całkowity:0Suma cząstkowa: 0,00 USD
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT

QF-HX103C IPTV 1GE + 3FE CATV XPON ONT

Automatyczna identyfikacja sieci GPON i EPON, porty WAN 1GE + 3FE, pojedynczy światłowód CATV, port SC-APC do oceny światłowodu.


Color:

    Szczegóły produktu

    1. Przegląd

    1G3F+CATV ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions by Qualfiber, and The carrier-class FTTH application provides data service access.
    1G3F+CATV ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically between EPON and GPON when it accesses the EPON OLT or GPON OLT.
    1G3F+CATV ONU adopts high reliability, easy management, configuration flexibility, and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X.
    1G3F+CATV ONU is designed by Realtek chipset 9603C.

    2.Functional Feature

    Support GPON and EPON Mode, and switch mode automatically
    Support ONU auto-discovery/Link detection/remote upgrade of software
    WAN connections support Route and Bridge mode
    Route mode supports PPPoE/DHCP/ static IP
    Support QoS and DBA
    Support port Isolation and port VLAN configuration
    Support Firewall function and IGMP snooping multicast feature
    Support LAN IP and DHCP Server configuration;
    Support CATV interface for IPTV, remotely controlled by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
    Support Port Forwarding and Loop-Detect
    Support TR069 remote configuration and maintenance
    Specialized design for system breakdown prevention to maintain stable system

    3.Hardware Specification

    Pozycja techniczna Detale
    Interfejs PON 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
    Czułość odbioru: ≤-28dBm
    Przesyłanie mocy optycznej: 0 ~ + 4dBm
    Odległość transmisji: 20 km
    Długość fali TX: 1310 nm, RX: 1490 nm
    Interfejs optyczny Złącze SC / UPC lub niestandardowe
    Interfejs LAN 1 x 10/100 / 1000Mbps i 3 x 10 / 100Mbps autoadaptacyjne interfejsy Ethernet. Full / Half, złącze RJ45
    Interfejs CATV RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz,  RF output impedance: 75ΩRF output level: 78dBuVAGC range: 0~-15dBmMER: ≥32dB@-15dBm
    DOPROWADZIŁO Status POWER, LOS, PON, SYS, LAN1 ~ LAN4, Internet, Worn, Normal (CATV)
    Naciśnij przycisk 1, dla funkcji resetowania
    Warunki pracy Temperature: 0℃~+50℃
    Humidity: 10%~90%(non-condensing)
    Storing Condition Temperatura: -30 ℃ ~ + 60 ℃
    Humidity: 10%~90%(non-condensing)
    Zasilacz DC 12 V / 1 A.
    Pobór energii ≤6 W.
    Wymiar 155mm×92mm×34mm(L×W×H)
    Waga netto 0,24 kg

    4. Oświetlenie panelu Wprowadzenie

    Lampka pilocka

    Status

    Opis

    PWR

    Na

    Urządzenie jest włączone.

    Poza

    Urządzenie jest wyłączone.

    PON

    Na

    Urządzenie zostało zarejestrowane w systemie PON.

    Migać

    Urządzenie rejestruje system PON.

    Poza

    Rejestracja urządzenia jest nieprawidłowa.

    LOS

    Migać

    Dawki urządzenia nie odbierają sygnałów optycznych.

    Poza

    Urządzenie otrzymało sygnał optyczny.

    SYS

    Na

    System urządzeń działa normalnie.

    Poza

    System urządzeń działa nieprawidłowo.

    INTERNET

    Migać

    Połączenie sieciowe urządzenia jest normalne.

    Poza

    Połączenie sieciowe urządzenia jest nieprawidłowe.

    LAN1 ~ LAN4

    Na

    Port (LANx) is connected properly (LINK).

    Migać

    Port (LANx) wysyła lub odbiera dane (ACT).

    Poza

    Wyjątek połączenia z portem (LANx) lub brak połączenia.

    Zużyty

    (CATV)

    Na

    Input optical power is higher than 3dbm or lower than -13dbm

    Poza

    Wejściowa moc optyczna wynosi od -13dbm do 3dbm

    Normalny

    (CATV)

    Na

    Wejściowa moc optyczna wynosi od -13dbm do 3dbm

    Poza

    Input optical power is higher than 3dbm or lower than -13dbm

    5.Application

    Typowe rozwiązanie : FTTO (biuro) 、 FTTB (budynek) 、 FTTH (dom)
    Typical Application(optional):INTERNET、IPTV、VOD、VoIP、IP Camera etc.

    Rys.: Wszystkie funkcje Opcjonalny schemat zastosowań

    6.Ordering information

    Nazwa produktu

    Model produktu

    Opisy

    XPON ONU 1G3F +CATV

    QF-HX103C

    1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter

    Skontaktuj się z nami:

    Qualfiber Technology Co., Ltd                                               
    Napisz do nas e-mail: sales@qualfiber.com
    Strona internetowa:https://www.qualfiber.com
    Dane techniczne mogą ulec zmianie bez powiadomienia.
    Copyright © TECHNOLOGIA QUALFIBER. Wszelkie prawa zastrzeżone.


  • Poprzedni:
  • Dalej:

  • Write your message here and send it to us