GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
Color:
Opis
GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
GY—— Communication room (field) outdoor optical cable
X —— Cable center tube (covering) structure
T —— Filled structure
W —— Steel polyethylene bonded sheath with steel wire entrained (referred to as W sheath)
Podrobnosti konstrukcije kabla
Število vlaknin | 1 ~ 24core | |||||||
Ohlapna cev | material | PBT | ||||||
premer | Ф2.2 (zunanja / notranja) | |||||||
Polnjenje s cevmi | Sestav za polnjenje cevi | |||||||
Jeklena žica | velikost | 0,8 mm | ||||||
Številka | 2 | |||||||
Zunanji plašč | material | PE, HDPE, LDPE | ||||||
Premer | 1,8 ± 0,2 mm |
Barva vlaken
Št. | 1 | 2 | 3 | 4 | 5 | 6 |
Barva | ||||||
Št. | 7 | 8 | 9 | 10 | 11 | 12 |
Barva | ||||||
Št. | 13 | 14 | 15 | 16 | 17 | 18 |
Barva | ||||||
Št. | 19 | 20 | 21 | 22 | 23 | 24 |
Barva |
Barva cevi
Kabel Mehanska značilnost
jedro | Premer kabla | utež | |||||
1 ~ 24 | 8,0 mm + -0,3 mm | 65kg / km + -10kg | |||||
Temperaturno območje | -40 + 70 | ----- | |||||
Minimalni polmer upogiba (mm) | Dolgoročno | 10D | |||||
Minimalni Radius(mm) |
Kratkoročno | 20D | |||||
Najmanjša dovoljena Tensile Strength(N) |
Dolgoročno | 1200 | |||||
Najmanjša dovoljena Tensile Strength(N) |
Kratkoročno | 1500 | |||||
Delovanje temperature (℃) |
-40 + 70 | ||||||
Namestitev temperature(℃) |
-20 + 60 | ||||||
Temperatura skladiščenja (℃) |
-40 + 70 |
Lastnost vlaken
Fiber slog | Enota | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5/125 |
MM OM3-300 |
|
stanje | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
slabljenje | dB / km | ≤ | ≤ | ≤ | ≤ 3,0 / 1,0 | ≤ 3,0 / 1,0 | |
0,36 / 0,23 | 0,34 / 0,22 | 3,0 / 1,0 | ---- | ---- | |||
Disprezija | 1550nm | Ps / (nm * km) | ---- | ≤18 | ---- | ---- | Disprezija |
1625nm | Ps / (nm * km) | ---- | ≤22 | ---- | ---- | ||
Bandwith | 850nm | MHZ.KM | ---- | ---- | ≧ 400 | ≧ 160 | Bandwith |
1300nm | MHZ.KM | ---- | ---- | ≧ 800 | ≧ 500 | ||
Ničelna disperzijska valovna dolžina | nm | 1300-1324 | ≧1302, ≤1322 |
---- | ---- | ≧ 1295, ≤1320 |
|
Ničelni naklon disprezije | nm | ≤0.092 | ≤0.091 | ---- | ---- | ---- | |
PMD Maximum Individual Fibr | ≤0.2 | ≤0.2 | ---- | ---- | ≤ 0,11 | ||
Vrednost povezave za oblikovanje PMD | Ps (nm2 * k m) |
≤ 0,12 | ≤ 0,08 | ---- | ---- | ---- | |
Valovna dolžina odrezane vlaknine λc | nm | ≧ 1180, ≤1330 |
≧1180, ≤1330 |
---- | ---- | ---- | |
Valovna wavelength λcc |
nm | ≤1260 | ≤1260 | ---- | ---- | ---- | |
MFD | 1310nm | hm | 9,2 +/- 0,4 | 9,2 +/- 0,4 | ---- | ---- | ---- |
1550nm | hm | 10,4 +/- 0,8 | 10,4 +/- 0,8 | ---- | ---- | ---- | |
Numerična Aperture(NA) |
---- | ---- | 0.200 + / -0.015 |
0,275 +/- 0. 015 |
0.200 +/- 0 .015 |
||
Korak (povprečje dvosmerne measurement) |
dB | ≤ 0,05 | ≤ 0,05 | ≤0,10 | ≤0,10 | ≤0,10 | |
Nepravilnosti glede length and point |
dB | ≤ 0,05 | ≤ 0,05 | ≤0,10 | ≤0,10 | ≤0,10 |
Neprekinjenost | |||||||
Razlika coefficient |
dB / km | ≤ 0,05 | ≤ 0,03 | ≤ 0,08 | ≤0,10 | ≤ 0,08 | |
Atenuacijska enakomernost | dB / km | ≤ 0,01 | ≤ 0,01 | ||||
Temeljni dimater | hm | 50 +/- 1,0 | 62,5 +/- 2,5 | 50 +/- 1,0 | |||
Premer obloge | hm | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | |
Nekrožna obloga | % | ≤1,0 | ≤1,0 | ≤1,0 | ≤1,0 | ≤1,0 | |
Premer prevleke | hm | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
Coating/chaffinch concentrically error |
hm | ≤12,0 | ≤12,0 | ≤12,0 | ≤12,0 | ≤12,0 | |
Premaz ni krožen | % | ≤6,0 | ≤6,0 | ≤6,0 | ≤6,0 | ≤6,0 | |
Napaka konektričnosti jedra / obloge | hm | ≤0,6 | ≤0,6 | ≤1,5 | ≤1,5 | ≤1,5 | |
Curl (polmer) | hm | ≤4 | ≤4 | ---- | ---- | ---- |
Paket
1. material za pakiranje: leseni boben | |||||||
2. Dolžina pakiranja: standardna dolžina kabla je 2 km. Na voljo je tudi druga dolžina kabla | |||||||
če to zahtevajo stranke |
Označevanje kablov in markacija kablov
Ohišje kabla je označeno z belimi črkami glede na zahteve stranke.
Write your message here and send it to us