Color:
Factory made hot-sale How To Setup Epon Onu - xPON ONT 2GE LAN 1200AC WiFi with CATV QF CXAC200WC – Qualfiber Detail:
XPON 2GE+1200AC WiFi+CATV
Overview
l 2GE+1200AC+CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access.
l 2GE+1200AC+CATV is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
l 2GE+1200AC+CATV adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X
l 2GE+1200AC+CATV is designed by Realtek chipset 9607C.
Feature
l Supports GPON and EPON auto detection
l Support Rogue ONT detection
l Support Route mode PPPoE/DHCP/Static IP and Bridge mixed mode
l Support NAT, Firewall function.
l Support Internet, IPTV and VoIP services automatically bound to ONT ports
l Support Virtual server, DMZ, and DDNS, UPnP
l Support Filtering based on MAC/IP/URL
l Support Access Control
l Support SIP protocol for VoIP Service
l Support 802.11 b/g/n, 802.11ac WIFI(2×2 MIMO) function and Multiple SSID
l Support NAT, Firewall function.
l Support Flow & Storm Control , Loop Detection and Port Forwarding
l Support IPv4/IPv6 dual stack and DS-Lite
l Support IGMP transparent/snooping/proxy
l Support TR069 Remote Configuration and maintenance
l Support CATV remote management from OLT
l Integrated OAM remote configuration and maintenance function
l Compatible with popular OLT (HW, ZTE, FiberHome…)
Specification
|
Technical Item |
Details |
| PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
2 x 10/100/1000Mbps auto adaptive Ethernet interfaces, Full/Half, RJ45 connector |
| WIFI Interface |
Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz, rate up to 300Mbps 5.0GHz Operating frequency: 5.150-5.825GHz, rate up to 867Mbps Support 2*2MIMO, 5dBi external antenna. Support: multiple SSID TX power: 11n–22dBm/11ac–24dBm |
| CATV Interface |
RF, optical power : +2~-18dBm Optical reflection loss: ≥60dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED |
9 LED, For Status of PWR、LOS、PON、LAN1、LAN2、2.4G、5.8G、 WORN、 Normal(CATV) |
| Push-Button |
3 button for Function of Power on/off, Reset, WPS |
| Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<6W |
| Net Weight |
<0.3kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
| 2.4G | On | 2.4G WIFI up |
| Blink | 2.4G WIFI is sending or/and receiving data (ACT). | |
| Off | 2.4G WIFI down | |
| 5.8G | On | 5G WIFI up |
| Blink | 5G WIFI is sending or/and receiving data (ACT). | |
| Off | 5G WIFI down | |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
| WORN
(CATV) |
On | Input optical power is higher than 2dBm or lower than -18dBm |
| Off | Input optical power is between -18dBm and 2dBm | |
| Normal
(CATV) |
On | Input optical power is between -18dBm and 2dBm |
| Off | Input optical power is higher than 2dBm or lower than -18dBm |
Application
l Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
l Typical Service：Broadband Internet access, IPV, VOD, video surveillance, CATV etc.
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
2GE+AC+CATV XPON |
Model Name:
QF-CXAC200WC Model Series No.: CX1102R007 |
2*10/100/1000M, 1 GPON interface, built-in FWDM, 1 RF interface, support WIFI 5G&2.4G, support CATV AGC, plastic casing, external power supply adapter |
Product detail pictures:
Related Product Guide:
What is DWDM? An easy way to understand DWDM and CWDM solution.
It really is our obligation to satisfy your requirements and efficiently serve you. Your fulfillment is our greatest reward. We're hunting forward to your check out for joint development for Factory made hot-sale How To Setup Epon Onu - xPON ONT 2GE LAN 1200AC WiFi with CATV QF CXAC200WC – Qualfiber, The product will supply to all over the world, such as: Japan, Mecca, Portugal, Our focus on product quality, innovation, technology and customer service has made us one of undisputed leaders worldwide in the field. Bearing the concept of "Quality First, Customer Paramount, Sincerity and Innovation" in our mind, We have achieved great progress in the past years. Clients are welcomed to buy our standard products, or send us requests. You will be impressed by our quality and price. Please contact us now!
By Darlene from Lesotho - 2018.11.06 10:04
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Salome from Finland - 2018.02.04 14:13
