Totale:0Totale parziale: USD $ 0,00
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT

QF-HX103C IPTV 1GE + 3FE CATV XPON ONT

Identificazione automatica per entrambe le reti GPON ed EPON, porte WAN 1GE + 3FE, CATV a fibra singola, porta SC-APC per la valutazione delle fibre.


Color:

    Dettagli del prodotto

    1. Panoramica

    1G3F+CATV ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions by Qualfiber, and The carrier-class FTTH application provides data service access.
    1G3F+CATV ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically between EPON and GPON when it accesses the EPON OLT or GPON OLT.
    1G3F+CATV ONU adopts high reliability, easy management, configuration flexibility, and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X.
    1G3F+CATV ONU is designed by Realtek chipset 9603C.

    2.Functional Feature

    Support GPON and EPON Mode, and switch mode automatically
    Support ONU auto-discovery/Link detection/remote upgrade of software
    WAN connections support Route and Bridge mode
    Route mode supports PPPoE/DHCP/ static IP
    Support QoS and DBA
    Support port Isolation and port VLAN configuration
    Support Firewall function and IGMP snooping multicast feature
    Support LAN IP and DHCP Server configuration;
    Support CATV interface for IPTV, remotely controlled by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
    Support Port Forwarding and Loop-Detect
    Support TR069 remote configuration and maintenance
    Specialized design for system breakdown prevention to maintain stable system

    3.Hardware Specification

    Articolo tecnico Dettagli
    Interfaccia PON 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
    Sensibilità di ricezione: ≤-28dBm
    Potenza ottica di trasmissione: 0 ~ + 4dBm
    Distanza di trasmissione: 20 km
    lunghezza d'onda TX: 1310nm, RX: 1490nm
    Interfaccia ottica Connettore SC / UPC o personalizzato
    Interfaccia LAN Interfacce Ethernet adattive da 1 x 10/100/1000 Mbps e 3 x 10/100 Mbps. Full / Half, connettore RJ45
    Interfaccia CATV RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz,  RF output impedance: 75ΩRF output level: 78dBuVAGC range: 0~-15dBmMER: ≥32dB@-15dBm
    GUIDATO Stato di ALIMENTAZIONE, LOS, PON, SYS, LAN1 ~ LAN4, Internet, Usurato, Normale (CATV)
    Premi il bottone 1, per la funzione di reset
    Condizioni operative Temperature: 0℃~+50℃
    Humidity: 10%~90%(non-condensing)
    Storing Condition Temperatura: -30 ℃ ~ + 60 ℃
    Humidity: 10%~90%(non-condensing)
    Alimentazione elettrica DC 12V / 1A
    Consumo di energia ≤6W
    Dimensione 155mm×92mm×34mm(L×W×H)
    Peso netto 0.24kg

    4. Introduzione alle luci a pannello

    Lampada pilota

    Stato

    Descrizione

    PWR

    Su

    Il dispositivo è acceso.

    via

    Il dispositivo è spento.

    PON

    Su

    Il dispositivo è stato registrato nel sistema PON.

    Blink

    Il dispositivo sta registrando il sistema PON.

    via

    La registrazione del dispositivo non è corretta.

    LOS

    Blink

    Le dosi del dispositivo non ricevono segnali ottici.

    via

    Il dispositivo ha ricevuto il segnale ottico.

    SYS

    Su

    Il sistema del dispositivo funziona normalmente.

    via

    Il sistema del dispositivo funziona in modo anomalo.

    INTERNET

    Blink

    La connessione di rete del dispositivo è normale.

    via

    La connessione di rete del dispositivo è anomala.

    LAN1 ~ LAN4

    Su

    Port (LANx) is connected properly (LINK).

    Blink

    La porta (LANx) sta inviando o / e ricevendo dati (ACT).

    via

    Eccezione connessione alla porta (LANx) o non connessa.

    Indossato

    (CATV)

    Su

    Input optical power is higher than 3dbm or lower than -13dbm

    via

    La potenza ottica in ingresso è compresa tra -13dbm e 3dbm

    Normale

    (CATV)

    Su

    La potenza ottica in ingresso è compresa tra -13dbm e 3dbm

    via

    Input optical power is higher than 3dbm or lower than -13dbm

    5.Application

    Soluzione tipica : FTTO (ufficio) 、 FTTB (edificio) 、 FTTH (casa)
    Typical Application(optional):INTERNET、IPTV、VOD、VoIP、IP Camera etc.

    Figura: Diagramma dell'applicazione opzionale per tutte le funzioni

    6.Ordering information

    nome del prodotto

    Modello di prodotto

    descrizioni

    XPON ONU 1G3F +CATV

    QF-HX103C

    1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter

    Contattaci:

    Qualfiber Technology Co., Ltd                                               
    Scrivici a: sales@qualfiber.com
    Sito web:https://www.qualfiber.com Le
    specifiche sono soggette a modifiche senza preavviso.
    Copyright © TECNOLOGIA QUALFIBER. Tutti i diritti riservati.


  • Precedente:
  • Successivo:

  • Write your message here and send it to us