Identification automatique des réseaux GPON et EPON, ports WAN 1GE + 3FE, CATV à fibre unique, port SC-APC pour l'évaluation des fibres.
Color:
1G3F+CATV ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions by Qualfiber, and The carrier-class FTTH application provides data service access.
1G3F+CATV ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically between EPON and GPON when it accesses the EPON OLT or GPON OLT.
1G3F+CATV ONU adopts high reliability, easy management, configuration flexibility, and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X.
1G3F+CATV ONU is designed by Realtek chipset 9603C.
2.Functional Feature
Support GPON and EPON Mode, and switch mode automatically
Support ONU auto-discovery/Link detection/remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IP
Support QoS and DBA
Support port Isolation and port VLAN configuration
Support Firewall function and IGMP snooping multicast feature
Support LAN IP and DHCP Server configuration;
Support CATV interface for IPTV, remotely controlled by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
Support Port Forwarding and Loop-Detect
Support TR069 remote configuration and maintenance
Specialized design for system breakdown prevention to maintain stable system
3.Hardware Specification
Article technique | Détails |
Interface PON | 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++) |
Sensibilité de réception: ≤-28dBm | |
Transmission de la puissance optique: 0 ~ + 4 dBm | |
Distance de transmission: 20 km | |
Longueur d'onde | TX: 1310 nm, RX: 1490 nm |
Interface optique | Connecteur SC / UPC ou personnalisé |
Interface LAN | 1 x 10/100/1000 Mbps et 3 x 10/100 Mbps interfaces auto-adaptatives Ethernet. Connecteur RJ45 plein / demi |
Interface CATV | RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz, RF output impedance: 75ΩRF output level: 78dBuVAGC range: 0~-15dBmMER: ≥32dB@-15dBm |
LED | État de POWER, LOS, PON, SYS, LAN1 ~ LAN4, Internet, Worn, Normal (CATV) |
Bouton | 1, pour la fonction de réinitialisation |
Condition de fonctionnement | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Température: -30 ℃ ~ + 60 ℃ |
Humidity: 10%~90%(non-condensing) | |
Source de courant | DC 12V / 1A |
Consommation d'énergie | ≤6W |
Dimension | 155mm×92mm×34mm(L×W×H) |
Poids net | 0,24 kg |
4. lumières de panneau Introduction
Témoin lumineux |
Statut |
La description |
PWR |
Sur |
L'appareil est sous tension. |
De |
L'appareil est éteint. | |
PON |
Sur |
L'appareil s'est enregistré sur le système PON. |
Cligner |
L'appareil enregistre le système PON. | |
De |
L'enregistrement de l'appareil est incorrect. | |
LOS |
Cligner |
L'appareil ne reçoit pas de signaux optiques. |
De |
L'appareil a reçu un signal optique. | |
SYS |
Sur |
Le système de périphérique fonctionne normalement. |
De |
Le système de l'appareil fonctionne anormalement. | |
L'INTERNET |
Cligner |
La connexion réseau de l'appareil est normale. |
De |
La connexion réseau de l'appareil est anormale. | |
LAN1 ~ LAN4 |
Sur |
Port (LANx) is connected properly (LINK). |
Cligner |
Le port (LANx) envoie ou reçoit des données (ACT). | |
De |
Exception de connexion au port (LANx) ou non connecté. | |
Porté (CATV) |
Sur |
Input optical power is higher than 3dbm or lower than -13dbm |
De |
La puissance optique d'entrée est comprise entre -13dbm et 3dbm | |
Normal (CATV) |
Sur |
La puissance optique d'entrée est comprise entre -13dbm et 3dbm |
De |
Input optical power is higher than 3dbm or lower than -13dbm |
5.Application
Solution typique: FTTO (bureau) 、 FTTB (bâtiment) 、 FTTH (maison)
Typical Application(optional):INTERNET、IPTV、VOD、VoIP、IP Camera etc.
Figure: Toutes les fonctions Diagramme d'application facultatif
6.Ordering information
Nom du produit |
modèle du produit |
Descriptions |
XPON ONU 1G3F +CATV |
QF-HX103C |
1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter |
Contactez-nous:
Qualfiber Technology Co., Ltd
Envoyez-nous un e-mail: sales@qualfiber.com
Site Web:https://www.qualfiber.com
Les spécifications peuvent être modifiées sans préavis.
Copyright © TECHNOLOGIE QUALFIBER. Tous les droits sont réservés.