Color:
Factory Price Gpon Ont Huawei - QF-HE101WCP 1GE+1FE+CATV+1POTS WIFI EPON – Qualfiber Detail:
Description
1. Overview
- 1G1F+WIFI+CATV+POTS ONU is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by Qualfiber, The carrier-class FTTH application provides data service access.
- 1G1F+WIFI+CATV+POTS ONU is based on mature and stable, cost-effective EPON technology. It can access to the major EPON OLT.
- 1G1F+WIFI+CATV+POTS ONU adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
- 1G1F+WIFI+CATV+POTS ONU is designed by Realtek chipset 9603C.
2. Functional Feature
- Support EPON Mode
- Support ONU auto-discovery/Link detection/remote upgrade of software
- WAN connections support Route and Bridge mode
- Route mode supports PPPoE/DHCP/ static IP
- Support WIFI Interface and multiple SSID
- Support QoS and DBA
- Support port Isolation and port vlan configuration
- Support Firewall function and IGMP snooping multicast feature
- Support LAN IP and DHCP Server configuration;
- Support CATV interface for Video Service
- Support POTS interface for Voip Service
- Support Port Forwarding and Loop-Detect
- Support TR069 remote configuration and maintenance
- Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
| Technical item | Details |
| PON Interface | 1 EPON port (EPON PX20+ ) |
| Receiving sensitivity: ≤-28dBm | |
| Transmitting optical power: 0~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/UPC Connector or customized |
| LAN Interface | 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| CATV Interface | RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: 78dBuV AGC range: 0~-15dBm MER: ≥32dB@-15dBm |
| POTS Interface | 1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909 |
| Wireless | Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: 78dBuV AGC range: 0~-15dBm MER: ≥32dB@-15dBm Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM |
| LED | 9, For Status of POWER、LOS、PON、SYS、LAN1、LAN2、WIFI、WPS、Internet |
| Push-Button | 3,For Function of Reset、WLAN、WPS |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%～90%（non-condensing） | |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%（non-condensing） | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm（L×W×H） |
| Net Weight | 0.24Kg |
4. Panel lights Introduction
| Pilot Lamp | Status | Description |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LOS | Blink | The device doses not receive optical signals. |
| Off | The device has received optical signal. | |
| SYS | On | The device system runs normally. |
| Off | The device system runs abnormally. | |
| INTERNET | Blink | The device network connection is normal. |
| Off | The device network connection is abnormal. | |
| WIFI | On | The WIFI interface is up. |
| Blink | The WIFI interface is sending or/and receiving data (ACT). | |
| Off | The WIFI interface is down. | |
| FXS | On | Phone has registered to the SIP Server. |
| Blink | Phone has registered and data transmission (ACT). | |
| Off | Phone registration is incorrect. | |
| WPS | Blink | The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
| LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. |
4. Application
- Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
- Typical Business：INTERNET、IPTV、IP Camera etc
5. Ordering information
| Product Name | Product Model | Descriptions |
| SFF Type EPON ONU | 1G+1F+WIFI+CATV+POT | 1×10/100/1000Mbps Ethernet, 1 x 10/100Mbps Ethernet , 1 SC Connector,1x CATV port,1x RJ11 POTS, 2.4GHz WIFI, Plastic Casing, External power supply adapter |
Contact us
Qualfiber Technology.,Co.,Ltd
Email to us: sales@qualfiber.com
Website: https://www.qualfiber.com
Specifications are subject to change without notice.
Copyright © QUALFIBER TECHNOLOGY. All rights reserved.
Product detail pictures:
Related Product Guide:
What is DWDM? An easy way to understand DWDM and CWDM solution.
We have been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Factory Price Gpon Ont Huawei - QF-HE101WCP 1GE+1FE+CATV+1POTS WIFI EPON – Qualfiber, The product will supply to all over the world, such as: Leicester, Greek, Poland, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.
Write your message here and send it to us
By Rita from Algeria - 2017.11.29 11:09
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Rita from Malawi - 2018.09.29 17:23
