Gesamt:0Zwischensumme: USD $ 0.00
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT
  • QF-HX103C IPTV 1GE + 3FE CATV XPON ONT

QF-HX103C IPTV 1GE + 3FE CATV XPON ONT

Automatische Identifizierung für GPON- und EPON-Netzwerk, 1GE + 3FE-WAN-Ports, Einzelfaser-CATV, SC-APC-Port zur Glasfaserbewertung.


Color:

    Produktdetail

    1. Übersicht

    1G3F+CATV ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions by Qualfiber, and The carrier-class FTTH application provides data service access.
    1G3F+CATV ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically between EPON and GPON when it accesses the EPON OLT or GPON OLT.
    1G3F+CATV ONU adopts high reliability, easy management, configuration flexibility, and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X.
    1G3F+CATV ONU is designed by Realtek chipset 9603C.

    2.Functional Feature

    Support GPON and EPON Mode, and switch mode automatically
    Support ONU auto-discovery/Link detection/remote upgrade of software
    WAN connections support Route and Bridge mode
    Route mode supports PPPoE/DHCP/ static IP
    Support QoS and DBA
    Support port Isolation and port VLAN configuration
    Support Firewall function and IGMP snooping multicast feature
    Support LAN IP and DHCP Server configuration;
    Support CATV interface for IPTV, remotely controlled by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
    Support Port Forwarding and Loop-Detect
    Support TR069 remote configuration and maintenance
    Specialized design for system breakdown prevention to maintain stable system

    3.Hardware Specification

    Technischer Artikel Einzelheiten
    PON-Schnittstelle 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
    Empfangsempfindlichkeit: ≤ -28dBm
    Optische Sendeleistung: 0 ~ + 4 dBm
    Übertragungsentfernung: 20 km
    Wellenlänge TX: 1310 nm, RX: 1490 nm
    Optische Schnittstelle SC / UPC-Anschluss oder angepasst
    LAN-Schnittstelle 1 x 10/100 / 1000Mbps und 3 x 10 / 100Mbps automatisch adaptive Ethernet-Schnittstellen. Voll / Halb, RJ45-Anschluss
    CATV-Schnittstelle RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz,  RF output impedance: 75ΩRF output level: 78dBuVAGC range: 0~-15dBmMER: ≥32dB@-15dBm
    LED Status von POWER, LOS, PON, SYS, LAN1 ~ LAN4, Internet, Abgenutzt, Normal (CATV)
    Druckknopf 1, Für die Funktion des Zurücksetzens
    Betriebszustand Temperature: 0℃~+50℃
    Humidity: 10%~90%(non-condensing)
    Storing Condition Temperatur: -30 ° C + 60 ° C.
    Humidity: 10%~90%(non-condensing)
    Netzteil DC 12V / 1A
    Energieverbrauch ≤6W
    Abmessungen 155mm×92mm×34mm(L×W×H)
    Nettogewicht 0,24 kg

    4. Panel Lichter Einführung

    Kontrolllampe

    Status

    Beschreibung

    PWR

    Auf

    Das Gerät ist eingeschaltet.

    aus

    Das Gerät ist ausgeschaltet.

    PON

    Auf

    Das Gerät hat sich beim PON-System registriert.

    Blinken

    Das Gerät registriert das PON-System.

    aus

    Die Geräteregistrierung ist falsch.

    LOS

    Blinken

    Das Gerät empfängt keine optischen Signale.

    aus

    Das Gerät hat ein optisches Signal empfangen.

    SYS

    Auf

    Das Gerätesystem läuft normal.

    aus

    Das Gerätesystem läuft abnormal.

    INTERNET

    Blinken

    Die Gerätenetzwerkverbindung ist normal.

    aus

    Die Netzwerkverbindung des Geräts ist abnormal.

    LAN1 ~ LAN4

    Auf

    Port (LANx) is connected properly (LINK).

    Blinken

    Port (LANx) sendet oder / und empfängt Daten (ACT).

    aus

    Port (LANx) Verbindungsausnahme oder nicht verbunden.

    Getragen

    (CATV)

    Auf

    Input optical power is higher than 3dbm or lower than -13dbm

    aus

    Die optische Eingangsleistung liegt zwischen -13 dBm und 3 dBm

    Normal

    (CATV)

    Auf

    Die optische Eingangsleistung liegt zwischen -13 dBm und 3 dBm

    aus

    Input optical power is higher than 3dbm or lower than -13dbm

    5.Application

    Typische Lösung: FTTO (Büro) 、 FTTB (Gebäude) 、 FTTH (Zuhause)
    Typical Application(optional):INTERNET、IPTV、VOD、VoIP、IP Camera etc.

    Abbildung: Alle Funktionen Optionales Anwendungsdiagramm

    6.Ordering information

    Produktname

    Produktmodell

    Beschreibungen

    XPON ONU 1G3F +CATV

    QF-HX103C

    1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter

    Kontaktieren Sie uns:

    Qualfiber Technology Co., Ltd                                               
    E-Mail an sales@qualfiber.com
    Website:https://www.qualfiber.com
    Technische
    Copyright © QUALFIBER TECHNOLOGY. Alle Rechte vorbehalten.


  • Zurück:
  • Weiter:

  • Write your message here and send it to us